Improving Lathe Efficiency through Overall Equipment Effectiveness and Automatic Maintenance Methods
DOI:
https://doi.org/10.26877/asset.v7i2.963Keywords:
lathe machine, maintenance planning, operational efficiency, optimiztaion of machne maintenance, OEEAbstract
In the current industrial era, operational efficiency is key for companies. Machining service providers can be seen from the number of workshops. At CV. XYZ has a lathe problem, there is no method for maintenance. Therefore, the purpose of this study is to calculate machine maintenance in companies using the Autonomous Maintenance (AM) method. From the calculation results obtained during January-June 2024, the highest average OEE value was in May 88.82%, Availability Rate parameters 88.76%, Performance Rate 99.28%, Rate of Quality 100%. The lowest average OEE value occurred in January 52.11% with Availability Rate parameters 76.44%, Performance Rate 90.66%, Rate of Quality 75%. From these results, it is necessary to have machine maintenance with indications for each component: cleaning the dynamo regularly, ensuring the on-off button is connected which is expected to increase effectiveness, extend machine life, and reduce maintenance costs.
References
[1] Fauzi, A., & Sumbodo, W., "The Effect of Feed Parameters on Surface Roughness of ST 40 on CNC Lathes", Journal of Vocational Dynamics of Mechanical Engineering, 6(1), 46–57. https://doi.org/10.21831/dinamika.v6i1.38114, 2021
[2] Hidayat, D., & Suhendar, E., "Application of Autonomous Maintenance in Reducing Technical Stopages of Can Making Department at PT. Frisian Flag Indonesia Plant Ciracas", Indonesian Journal of Social Technology, 1(2), 82–88. https://doi.org/10.36418/jist.v1i2.22, 2020
[3] Alkabaa, A. S., Taylan, O., Guloglu, B., Baik, S., Sharma, V., Mishra, R., Alharbi, R., & Upreti, G., "A fuzzy ANP-based criticality analyzes approach of reliability-centered maintenance for CNC lathe machine components", Journal of Radiation Research and Applied Sciences, 17(1), 100738. https://doi.org/10.1016/j.jrras.2023.100738, 2024
[4] Pranowo, I. D., "Maintenance Systems and Management", In Revista Brasileira de Linguística Aplicada (Vol. 5, Issue 1). https://revistas.ufrj.br/index.php/rce/article/download/1659/1508%0Ahttp://hipatiapress.com/hpjournals/index.php/qre/article/view/1348%5Cnhttp://www.tandfonline.com/doi/abs/10.1080/09500799708666915%5Cnhttps://mckinseyonsociety.com/downloads/reports/Educa, 2020
[5] Akbar, M. R., & Widiasih, W., "Analysis of Lathe Machine Maintenance with Preventive Maintenance Method to Avoid Sudden Damage and to Calculate Maintenance Costs", SENOPATI Journal: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 4(1), 32–45. https://doi.org/10.31284/j.senopati.2022.v4i1.3086, 2022
[6] Hadi Ariyah., "Application of Overall Equipment Effectiveness (OEE) Method in Increasing Batching Plant Machine Efficiency (Case Study: PT. Lutvindo Wijaya Perkasa)", Journal of Applied Industrial Technology and Management, 1(2), 70–77. https://doi.org/10.55826/tmit.v1iii.10, 2022
[7] Thiede, S., "Advanced energy data analytics to predict machine overall equipment effectiveness (OEE): a synergetic approach to foster sustainable manufacturing", Procedia CIRP, 116, 438–443. https://doi.org/10.1016/j.procir.2023.02.074, 2023
[8] Cerna, G. E. P., Hernandez, J. R. C., Herazo, J. C. M., & Castillo, A. P., “Evaluation of the overall effectiveness (OEE) of autonomous transportation system (AHS) equipment and its impact on mine design", Open pit mine case study. Procedia Computer Science, 224, 468–473. https://doi.org/10.1016/j.procs.2023.09.066, 2023
[9] Van De Ginste, L., Aghezzaf, E. H., & Cottyn, J., “The role of equipment flexibility in Overall Equipment Effectiveness (OEE)-driven process improvement,” Procedia CIRP, 107(March), 289–294. https://doi.org/10.1016/j.procir.2022.04.047, 2022
[10] Maulana, M. B., & Widyaningrum, D., "Analysis of the Effectiveness of Automatic Lathes Using the OEE and FMEA Methods", Advance Sustainable Science Engineering and Technology, 5(3), 0230309. https://doi.org/10.26877/asset.v5i3.17214, 2023
[11] Gianfranco, J., Taufik, M. I., Hariadi, F., & Fauzi, M., "Measurement of Total Productive Maintenance (Tpm) Using Overall Equipment Effectiveness (Oee) Method on Production Reactor Machines", Lebesgue Journal: Scientific Journal of Mathematics Education, Mathematics and Statistics, 3(1), 160–172. https://doi.org/10.46306/lb.v3i1.109, 2022
[12] Kurnia, H., Jaqin, C., Hardi Purba, H., Kunci, K., Garmen, I., & Kaki, K., "the Pdca Approach With Oee Methods for Increasing Productivity in the Garment Industry", Jurnal Ilmiah Teknik Industri, 10(1), 57–68,2022
[13] Rusdi Widya, A., & Emarilis Intani, A., "PELITA INDUSTRI Fool Proof Information System (FPIS) Design to Improve Autonomous Maintenance Performance", Jurnal Pelita Industri, 1(1), 22–35, 2020
[14] Munawar Alfansury, & Septiawan, W., "Jurnal of Materials, Manufacturing and Energy Engineering", Journal of Materials, Manufacturing and Energy Engineering, 6(1), 137–143. http://jurnal.umsu.ac.id/index.php/RMME, 2023
[15] Wibowo, T. J., Hidayatullah, T. S., & Nalhadi, A., "Maintenance Analysis on Lathe Machines with Reliability Centered Maintenance (RCM) Approach", Journal of Industrial Engineering (Jri), 3(2), 110–120. https://doi.org/10.37631/jri.v3i2.485, 2021
[16] Adiyanto Pratama, S., & Koswara, E., "Production Process of Vertical Shaft Mixer Parts Using Conventional Lathes and CNC Milling Machines", Majalengka Technology Seminar (Stima), 7, 341–352. https://doi.org/10.31949/stima.v7i0.912, 2023
[17] Cv, S. K., Semarang, I. R., & Oleh, D., "Case Study of CV. Iso Rubber Semarang ) COMPILED BY: Rcm Ii", 2021
[18] Guritno, J., & Sidhi Cahyana, A., "Implementation of Autonomous Maintenance in Total Productive Maintenance", Procedia of Engineering and Life Science, 1(2). https://doi.org/10.21070/pels.v1i2.914, 2021
[19] Jnsta, T. A., Alwi, M., & Yunus, K., "JOURNAL OF NATURAL SCIENCE AND Analysis of Lathe Machine Maintenance Using the Reliability Centered Maintenance (RCM) Method at CV. Sumber Jaya Makassar", 2024
[20] Ramadhani, A. G., Azizah, D. Z., Nugraha, F., & Fauzi, M., "Analysis of the Implementation of TPM (Total Productive Maintenance) and OEE (Overall Equipment Effectiveness) on Auto Cutting Machines at PT XYZ", Scientific Journal of Industrial Engineering and Management, 2(1), 59–69. https://doi.org/10.46306/tgc.v2i1.25, 2022
