A New Approach to Measuring Institutional and Researcher Contributions to the SDGs: Combining Data from Elsevier SciVal and VOSviewer
DOI:
https://doi.org/10.26877/asset.v6i4.1076Keywords:
Sustainable Development Goals (SDGs), Mechanical Engineering, Time Higher Education, World University Ranking, Elsevier SciVal, VOSviewer, Research Impact, Research Collaboration, Energy Efficiency, Sustainable TechnologiesAbstract
The Sustainable Development Goals (SDGs), established by the United Nations in 2015, are a comprehensive global framework that addresses social, economic, and environmental challenges through sustainable development. This study examines the role of universities, specifically focusing on the Department of Mechanical Engineering at Universitas Muhammadiyah Magelang (UNIMMA), in contributing to the SDGs. The study utilized data from Elsevier’s SciVal to analyze the department’s contribution to the SDGs through scientific publications in the Scopus database. A total of 97 out of 156 articles published by nine researchers from the department were found to contribute to various SDGs, with a significant focus on Goals 7 (affordable and clean energy), 17 (partnerships for the goals), 9 (industry, innovation, and infrastructure), and 12 (responsible consumption and production). The study highlights the department’s collaborative efforts and alignment with global sustainability goals. In addition, VOSviewer was used to map the research collaboration network within the department, revealing strong contributions to energy efficiency, sustainable technologies, and climate action. However, the department's research shows limited contribution to social SDGs such as poverty alleviation and gender equality. By mapping the university’s contributions to the SDGs, this study helps faculty members identify opportunities for targeted research collaborations, address gaps in SDG contributions, and enhance partnerships with researchers from other institutions, thus broadening the university’s impact on global sustainable development goals.
References
“Transforming our world: the 2030 Agenda for Sustainable Development.” Sep. 08, 2024, [Online]. Available: https://sdgs.un.org/2030agenda.
G. Mujtaba, M. U. H. Shah, A. Hai, M. Daud, and M. Hayat, “A holistic approach to embracing the United Nation’s Sustainable Development Goal (SDG-6) towards water security in Pakistan,” Journal of Water Process Engineering, vol. 57, p. 104691, 2024, doi: 10.1016/j.jwpe.2023.104691.
D. O. Obura, “Getting to 2030-Scaling effort to ambition through a narrative model of the SDGs,” Marine Policy, vol. 117, p. 103973, 2020, doi: 10.1016/j.marpol.2020.103973.
N. P. Hariram, K. B. Mekha, V. Suganthan, and K. Sudhakar, “Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability,” Sustainability, vol. 15, no. 13, p. 10682, 2023, doi: 10.3390/su151310682.
E. Hoss-Golan, A. Gofen, and A. M. Wellstead, “Meeting expectations? Response of policy innovation labs to sustainable development goals,” Policy and Society, vol. 43, no. 3, pp. 334–350, 2024, doi: 10.1093/polsoc/puae023.
A. Breuer, J. Leininger, D. Malerba, and J. Tosun, “Integrated policymaking: Institutional designs for implementing the sustainable development goals (SDGs),” World Development, vol. 170, p. 106317, 2023, doi: 10.1016/j.worlddev.2023.106317.
P. Vera-Sanso, “Will the SDGs and the UN decade of healthy ageing leave older people behind?,” Progress in Development Studies, vol. 23, no. 4, pp. 391–407, 2023, doi: 10.1177/1464993423119380.
P. Pattberg and K. Bäckstrand, “Enhancing the achievement of the SDGs: lessons learned at the half-way point of the 2030 Agenda,” International Environmental Agreements: Politics, Law and Economics, vol. 23, no. 2, pp. 107–114, 2023, doi: 10.1007/s10784-023-09615-9.
A. Famalika and P. R. Sihombing, “Implementation of K-Means and K-Medians Clustering in Several Countries Based on Global Innovation Index (GII) 2018,” Advance Sustainable Science, Engineering and Technology, vol. 3, no. 1, p. 343547, 2021.
K. Henderson and M. Loreau, “A model of Sustainable Development Goals: Challenges and opportunities in promoting human well-being and environmental sustainability,” Ecological Modelling, vol. 475, p. 110164, 2023, doi: 10.1016/j.ecolmodel.2022.110164.
M. Kuc-Czarnecka, I. Markowicz, and A. Sompolska-Rzechuła, “SDGs implementation, their synergies, and trade-offs in EU countries–Sensitivity analysis-based approach,” Ecological Indicators, vol. 146, p. 109888, 2023, doi: 10.1016/j.ecolind.2023.109888.
T. Adams, S. M. Jameel, and J. Goggins, “Education for sustainable development: mapping the SDGs to university curricula,” Sustainability, vol. 15, no. 10, p. 8340, 2023, doi: 10.3390/su15108340.
D. I. Setyanansyach, M. Setiyo, and T. Raja, “Review and Bibliometric Analysis of Biogas Power Plants in Indonesia,” Advance Sustainable Science, Engineering and Technology (ASSET), vol. 5, no. 3, p. 2303015, 2023, doi: 10.26877/asset.v5i3.16806.
H. A. M. Salman, R. A. Wahyuono, and T. Warsokusumo, “Optimizing Biomass Pre-Treatment Technologies for BBJP Plants in Indonesia: A Multi-Criteria Decision Making Approach,” Advance Sustainable Science, Engineering and Technology, vol. 6, no. 1, p. 2401021, 2024.
A. Alwahab, P. T. Maharani, A. Alimin, and A. Zaeni, “Optimization of Biogas Liquid Waste from Livestock Manure as a Source of Renewable Energy through Microbial Fuel Cell (MFC) Technology,” Advance Sustainable Science, Engineering and Technology, vol. 6, no. 2, p. 240202, 2024.
M. Dey, “Role of university libraries in Sustainable Development Goals realisation,” International Journal of Public Sector Performance Management, vol. 11, no. 4, pp. 481–493, 2023, doi: 10.1504/IJPSPM.2023.131344.
M. C. Unegbu, O. Immaculata, and B. N. Emuchay, “Information literacy and sustainable development goals implementation: The role of libraries and librarians,” International Journal of Social Science and Education Research Studies, vol. 3, no. 1, pp. 1017–1112, 2023, doi: 10.55677/ijssers/V03I1Y2023-13.
N. Alfirević, L. Malešević Perović, and M. Mihaljević Kosor, “Productivity and impact of sustainable development goals (SDGs)-related academic research: a bibliometric analysis,” Sustainability, vol. 15, no. 9, p. 7434, 2023, doi: 10.3390/su15097434.
W. Leal Filho et al., “Integrating the Sustainable Development Goals into the strategy of higher education institutions,” International Journal of Sustainable Development & World Ecology, vol. 30, no. 5, pp. 564–575, 2023, doi: 10.1080/13504509.2023.2167884.
S. Pakkan, C. Sudhakar, S. Tripathi, and M. Rao, “A correlation study of sustainable development goal (SDG) interactions,” Quality & Quantity, vol. 57, no. 2, pp. 1937–1956, 2023, doi: 10.1007/s11135-022-01443-4.
H. G. Abera, “The role of education in achieving the Sustainable Development Goals (SDGs): A global evidence based research article,” International Journal of Social Science and Education Research Studies, vol. 3, no. 01, pp. 67–81, 2023, doi: 10.55677/ijssers/V03I1Y2023-09.
P. G. Fuchs, C. P. Finatto, R. S. Birch, A. R. de Aguiar Dutra, and J. B. S. O. de Andrade Guerra, “Sustainable development goals (SDGs) in Latin-American universities,” Sustainability, vol. 15, no. 11, p. 8556, 2023, doi: 10.3390/su15118556.
M. E. Angelaki, F. Bersimis, T. Karvounidis, and C. Douligeris, “Towards more sustainable higher education institutions: Implementing the sustainable development goals and embedding sustainability into the information and computer technology curricula,” Education and Information Technologies, vol. 29, no. 4, pp. 5079–5113, 2024, doi: 10.1007/s10639-023-12025-8.
C. Persson, D. Einarson, and M. Melén, “Educating the educators to be a driving force in higher education towards sustainable development,” International Journal of Sustainability in Higher Education, vol. 24, no. 9, pp. 197–212, 2023, doi: 10.1108/IJSHE-10-2022-0332.
E. Mokski, W. Leal Filho, S. Sehnem, and J. B. S. O. de Andrade Guerra, “Education for sustainable development in higher education institutions: an approach for effective interdisciplinarity,” International Journal of Sustainability in Higher Education, vol. 24, no. 1, pp. 96–117, 2023, doi: 10.1108/IJSHE-07-2021-0306.
D. R. Adhikari and P. Shrestha, “Knowledge management initiatives for achieving sustainable development goal 4.7: higher education institutions’ stakeholder perspectives,” Journal of Knowledge Management, vol. 27, no. 4, pp. 1109–1139, 2023, doi: 10.1108/JKM-03-2022-0172.
G. Murillo-Vargas, C. H. Gonzalez-Campo, and D. I. Brath, “Mapping the Integration of the Sustainable Development Goals in Universities: Is It a Field of Study,” Journal of Teacher Education for Sustainability, vol. 22, no. 2, pp. 7–25, 2020, doi: 10.2478/jtes-2020-0013.
E. Prieto-Jiménez, L. López-Catalán, B. López-Catalán, and G. Domínguez-Fernández, “Sustainable development goals and education: A bibliometric mapping analysis,” Sustainability (Switzerland), vol. 13, no. 4, pp. 1–20, 2021, doi: 10.3390/su13042126.
E. De La Poza, P. Merello, A. Barberá, and A. Celani, “Universities’ reporting on SDGs: Using the impact rankings to model and measure their contribution to sustainability,” Sustainability (Switzerland), vol. 13, no. 4, pp. 1–30, 2021, doi: 10.3390/su13042038.
A. Mistry, H. Sellers, J. Levesley, and S. Lee, “Mapping a university’s research outputs to the UN Sustainable Development Goals,” Emerald Open Research, vol. 1, no. 9, Dec. 2023, doi: 10.1108/EOR-09-2023-0004.
Elsevier, “What are Sustainable Development Goals (SDGs)? - Scopus: Access and use Support Center.” Sep. 08, 2024, [Online]. Available: https://service.elsevier.com/app/answers/detail/a_id/31662/supporthub/scopus/.
A. Kolakoti, M. Setiyo, and M. L. Rochman, “A Green Heterogeneous Catalyst Production and Characterization for Biodiesel Production using RSM and ANN Approach,” International Journal of Renewable Energy Development, vol. 11, no. 3, pp. 703–712, 2022, doi: 10.14710/ijred.2022.43627.
I. Habibi, Triyono, and N. Muhayat, “A Review on Aluminum Arc Welding and It’s Problems,” in Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 2020, pp. 819–826, doi: 10.1007/978-981-15-4481-1_78.
Y. A. Fatimah, R. Murniningsih, A. Setiawan, and M. Aman, “A Smart Sustainable approach for waste management in post-natural disaster phase,” IOP Conference Series: Materials Science and Engineering, vol. 674, no. 1, p. 012042, Nov. 2019, doi: 10.1088/1757-899X/674/1/012042.
M. Setiyo, “Alternative fuels for transportation sector in Indonesia,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 1–6, 2022, doi: 10.31603/mesi.6850.
M. Setiyo, B. Waluyo, A. Suryawan, M. B. Triyono, and D. E. Murniati, “Alternative model of curriculum development for vocational higher education: Indonesian perspective,” Curriculum Perspectives, 2020, doi: 10.1007/s41297-020-00114-4.
M. Murugan et al., “An overview on energy and exergy analysis of solar thermal collectors with passive performance enhancers,” Alexandria Engineering Journal, vol. 61, no. 10, pp. 8123–8147, Oct. 2022, doi: 10.1016/j.aej.2022.01.052.
T. Raja, M. Setiyo, V. Murugan, and S. Dhandapani, “Analysis of the Temperature Variation of Bizarre Thermal Barrier Coatings and their impacts on Engine,” Automotive Experiences, vol. 6, no. 3, pp. 497–514, 2023, doi: 10.31603/ae.9802.
C. Rosenthal, Y. A. Fatimah, and W. K. Biswas, “Application of 6R Principles in Sustainable Supply Chain Design of Western Australian White Goods,” Procedia CIRP, vol. 40, pp. 318–323, 2016, doi: 10.1016/j.procir.2016.01.048.
Y. D. Herlambang et al., “Application of a PEM Fuel Cell Engine as a Small-Scale Power Generator for Small Cars with Different Fuel Concentrations,” Automotive Experiences, vol. 6, no. 2, pp. 273–289, Aug. 2023, doi: 10.31603/ae.9225.
A. Triwiyatno, S. Munahar, M. Munadi, and J. D. Setiawan, “Application of driving behavior control system using artificial neural network to improve driving comfort by adjusting air-to-fuel ratio,” IIUM Engineering Journal, vol. 24, no. 2, pp. 337–353, Jul. 2023, doi: 10.31436/iiumej.v24i2.2781.
F. D. Pertiwi, D. C. Anindito, I. Habibi, T. V. Kusumadewi, M. Setiyo, and A. Kolakoti, “Application of Particle Swarm Optimization in Duty Cycle Adjustment for Optimization of Oxyhydrogen Generator,” ASEAN Journal of Science and Engineering, vol. 4, no. 2, pp. 221–236, 2024, doi: 10.17509/ajse.v4i2.70509.
S. Munahar, A. Triwiyatno, J. D. Setiawan, and M. Munadi, “Assessment of fuel management clusters in the development of a driving behavior control system model using lookup table mapping to improve fuel savings,” Results in Engineering, vol. 18, p. 101170, Jun. 2023, doi: 10.1016/j.rineng.2023.101170.
A. Kolakoti, M. Setiyo, and B. Waluyo, “Biodiesel Production from Waste Cooking Oil: Characterization, Modeling and Optimization,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 22–30, 2021, doi: 10.31603/mesi.5320.
R. P. Putra, D. Yuvenda, M. Setiyo, A. Andrizal, and M. Martias, “Body City Car Design of Two Passengers Capacity: A Numerical Simulation Study,” Automotive Experiences, vol. 5, no. 2, pp. 163–172, 2022, doi: 10.31603/ae.6304.
M. Setiyo and B. Waluyo, “Captain Seat: Smart Solution for Physical Distancing on Buses During the Covid-19 Pandemic,” Automotive Experiences, vol. 4, no. 1, pp. 1–4, 2021, doi: 10.31603/ae.4383.
H. Y. Nanlohy, H. Riupassa, and M. Setiyo, “Characterizing of Nano Activated Bio-Carbon of Sago Waste as a Homogeneous Combustion Catalyst,” Automotive Experiences, vol. 7, no. 1, pp. 77–85, Apr. 2024, doi: 10.31603/AE.10619.
Y. A. Fatimah, D. Kannan, K. Govindan, and Z. A. Hasibuan, “Circular economy e-business model portfolio development for e-business applications: Impacts on ESG and sustainability performance,” Journal of Cleaner Production, 2023, doi: 10.1016/j.jclepro.2023.137528.
D. Yuvenda et al., “Combustion and Emission Characteristics of CNG-Diesel Dual Fuel Engine with Variation of Air Fuel Ratio,” Automotive Experiences, vol. 5, no. 3, pp. 507–527, 2022, doi: 10.31603/ae.7807.
A. Damara, B. Waluyo, and Saifudin, “Combustion Velocity Constant of Gasoline-Metanol-(Ethanol) Blend Using the Single Droplet Combustion Method,” E3S Web of Conferences, vol. 500, p. 03016, Mar. 2024, doi: 10.1051/E3SCONF/202450003016.
M. I. Rosyidi, A. H. Purwantini, L. Muliawanti, B. C. Purnomo, and A. Widyanto, “Communication Participation in Community Empowerment for Energy Independent Tourism Villages in the Pandemic Era,” E3S Web of Conferences, vol. 232, p. 01036, Jan. 2021, doi: 10.1051/e3sconf/202123201036.
E. M. Widodo, M. Setiyo, M. I. Rosyidi, T. A. Purnomo, M. Husni, and S. Sudaryono, “Comparison of engine performance of Bajaj Qute RE60 using gasoline and LPG,” 2020, doi: 10.1088/1742-6596/1517/1/012001.
D. W. Karmiadji, M. Gozali, M. Setiyo, T. Raja, and T. A. Purnomo, “Comprehensive Analysis of Minibuses Gravity Center: A Post-Production Review for Car Body Industry,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 31–40, 2021, doi: 10.31603/mesi.5250.
M. I. Rosyidi, E. M. Widodo, T. A. Purnomo, M. Setiyo, and D. W. Karmiadji, “Converting ToD vehicle from gasoline to LPG in Indonesia: Cost identification and investment analysis,” International Journal of Technology, vol. 11, no. 1, pp. 100–110, 2020, doi: 10.14716/ijtech.v11i1.2161.
M. Setiyo, B. Waluyo, N. Widodo, M. L. Rochman, S. Munahar, and S. D. Fatmaryanti, “Cooling effect and heat index (HI) assessment on car cabin cooler powered by solar panel in parked car,” Case Studies in Thermal Engineering, vol. 28, no. August, p. 101386, 2021, doi: 10.1016/j.csite.2021.101386.
B. Waluyo et al., “Cooling effect characteristic of the novel half-cycle refrigeration system on a liquefied petroleum gas (LPG) fueled vehicle,” Thermal Science and Engineering Progress, vol. 34, p. 101405, 2022, doi: 10.1016/j.tsep.2022.101405.
M. Setiyo, D. R. B. Syaka, B. Waluyo, N. Hamidi, and B. F. T. Kiono, “Cooling effect potential from liquefied petroleum gas flow in the fuel line of vehicle,” International Journal of Automotive and Mechanical Engineering, 2017, doi: 10.15282/ijame.14.4.2017.9.0370.
S. O. Effiom et al., “Cost, Emission, and Thermo-Physical Determination of Heterogeneous Biodiesel from Palm Kernel Shell Oil: Optimization of Tropical Egg Shell Catalyst,” Indonesian Journal of Science and Technology, 2024, doi: 10.17509/ijost.v9i1.64006.
Y. A. Fatimah, A. Widianto, and M. Hanafi, “Cyber-physical System Enabled in Sustainable Waste Management 4.0: A Smart Waste Collection System for Indonesian Semi-Urban Cities,” 2020, doi: 10.1016/j.promfg.2020.02.169.
R. M. Susanto, T. Nurrochman, S. Munahar, and A. I. Ramadhan, “Design and application of electronic tracking control systems (ETCS) to improve vehicle safety,” Automotive Experiences, 2019, doi: 10.31603/ae.v2i3.2766.
E. Emagbetere et al., “Development and performance evaluation of a portable and cost-effective three-axis CNC drilling machine suitable for small and medium scale manufacturing industries,” 2023, doi: 10.1063/5.0120849.
S. Munahar, M. Munadi, B. C. Purnomo, and H. R. Fatoni, “Development of Driver Behavior Research on Vehicles: Article Review,” E3S Web of Conferences, vol. 500, p. 03005, Mar. 2024, doi: 10.1051/E3SCONF/202450003005.
Y. A. Fatimah, P. O. H. Putra, and Z. A. Hasibuan, “E-business adoption and application portfolio management in remanufacturing small and medium enterprises,” 2017, doi: 10.1109/IAC.2016.7905743.
Y. A. Fatimah, R. Murniningsih, and A. Setiawan, “Ecological Smart and Sustainable Waste Management: A Conceptual Framework,” in Sustainable Production, Life Cycle Engineering and Management, 2021.
B. Waluyo and B. C. Purnomo, “Exhaust Gas Emissions of Homogeneous Gasoline-Methanol-(Ethanol) Blends,” Automotive Experiences, vol. 5, no. 2, pp. 173–181, 2022, doi: 10.31603/ae.6599.
M. Setiyo, E. M. Widodo, M. I. Rosyidi, T. A. Purnomo, B. S. Rahardja, and S. Suryantoro, “Economic values and CO2 simulation on the application of LPG for public fleets in magelang, Indonesia: Executive data to support the clean city program,” Periodica Polytechnica Transportation Engineering, vol. 48, no. 2, pp. 159–172, 2020, doi: 10.3311/PPtr.12841.
N. Anisa, D. B. Darmadi, Sugiono, Ngafwan, B. Waluyo, and I. N. G. Wardana, “Effect of papaya latex bio-activators on the morphological changes of recycled pulp fiber and paper properties: A progress towards green technology,” 2023, doi: 10.1063/5.0120577.
A. Kolakoti, B. Prasadarao, K. Satyanarayana, M. Setiyo, H. Köten, and M. Raghu, “Elemental, Thermal and Physicochemical Investigation of Novel Biodiesel from Wodyetia Bifurcata and Its Properties Optimization using Artificial Neural Network (ANN),” Automotive Experiences, vol. 5, no. 1, pp. 3–15, 2022, doi: 10.31603/ae.6171.
M. Setiyo, B. Waluyo, P. Gobbato, and M. Masi, “Energy efficiency ratio (EER) of novel air conditioning system on LPG fuelled vehicle: A lab-scale investigation,” International Journal of Automotive and Mechanical Engineering, 2019.
B. Waluyo, Y. Arifatul Fatimah, I. Habibi, F. D. Pertiwi, M. Setiyo, and E. Marlina, “Enhancing Biodiesel-Methanol blends with 1-Butanol for stable and efficient fuels,” Fuel, 2024, doi: 10.1016/j.fuel.2023.130667.
E. M. Widodo et al., “Environmental benefit of public fleet fueled by LPG/VI-Gas in Magelang City, Indonesia: A Simulation Study,” 2019, doi: 10.1088/1757-899X/674/1/012052.
D. W. Karmiadji, M. Gozali, A. Anwar, H. Purnomo, M. Setiyo, and R. Junid, “Evaluation of Operational Loading of the Light-Rail Transit (LRT) in Capital Region, Indonesia,” Automotive Experiences, vol. 3, no. 3, pp. 104–114, 2020, doi: 10.31603/ae.v3i3.3882.
C. N. Nwaokocha et al., “Experimental investigation into the viability of waste derived fuel from cassava wastes,” 2023, doi: 10.1063/5.0120448.
D. C. Anindito, S. Hadi, and D. D. D. P. Tjahjana, “Experimental investigation of stage modification on Savonius rotor,” in AIP Conference Proceedings, 2023, p. 020015, doi: 10.1063/5.0125824.
W. Anggono, S. Sutrisno, F. D. Suprianto, M. Setiyo, R. Wibisono, and G. J. Gotama, “Experimental investigation of the effect of Nephelium Lappaceum seed biodiesel to the automotive diesel engine performance,” 2019, doi: 10.1088/1755-1315/257/1/012039.
A. Kolakoti, A. V. Kumar, R. Metta, M. Setiyo, and M. L. Rochman, “Experimental studies on in-cylinder combustion, exergy performance, and exhaust emission in a Compression Ignition engine fuelled with neat biodiesels,” Indonesian Journal of Science and Technology, vol. 7, no. 2, pp. 219–236, 2022, doi: https://doi.org/10.17509/ijost.v7i2.49680.
S. Hadi, M. Sidiq, D. C. Anindito, A. Prasetyo, D. D. D. P. Tjahjana, and R. Hadiani, “Experimental study of the effects of blade twist on the performance of Savonius water turbine in water pipe,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 57, no. 2, pp. 202–207, 2019.
M. Setiyo, E. M. Widodo, M. I. Rosyidi, B. Waluyo, Z. B. Pambuko, and N. Tamaldin, “Feasibility study on small cars as an alternative to conventional fleets due to low occupancy: case study in Indonesia,” Heliyon, vol. 6, no. 1, p. e03318, 2020, doi: https://doi.org/10.1016/j.heliyon.2020.e03318.
M. Setiyo and B. Waluyo, “Fuel as secondary refrigerant on LPG fuelled vehicle: A thermodynamics analysis,” Journal of Mechanical Engineering and Sciences, vol. 13, no. 1, pp. 4390–4402, 2019, doi: 10.15282/jmes.13.1.2019.04.0374.
S. Munahar, M. Setiyo, B. C. Purnomo, and Y. Rifangi, “Fuel control system modeling for LPG fueled engine using Adaptive Neuro-Fuzzy Inference Systems (ANFIS),” 2020, doi: 10.1088/1742-6596/1517/1/012013.
B. Waluyo, M. Setiyo, Saifudin, and I. N. G. Wardana, “Fuel performance for stable homogeneous gasoline-methanol-ethanol blends,” Fuel, vol. 294, p. 120565, 2021, doi: 10.1016/j.fuel.2021.120565.
S. Munahar, A. Triwiyatno, M. Munadi, and J. D. Setiawan, “Fuel Saving Indeks Assessment on Driving Behavior Control System Prototype Model Using Neural Network,” Archives of Transport, vol. 63, no. 3, pp. 123–141, Sep. 2022, doi: 10.5604/01.3001.0016.0019.
I. C. Setiawan and M. Setiyo, “Fueling the Future: The Case for Heavy-Duty Fuel Cell Electric Vehicles in Sustainable Transportation,” Automotive Experiences, vol. 7, no. 1, pp. 1–5, Apr. 2024, doi: 10.31603/ae.11285.
S. Munahar, M. Munadi, A. Triwiyatno, and J. D. Setiawan, “Fuzzy Logic Control System For Fuel-Saving Using Steering Behavior,” 2023, doi: 10.1007/978-981-19-3629-6_7.
S. Kamal, S. Munahar, A. Abbas, Y. Ito, and A. Wahyudi, “Hospital Bed for Diabetes Care : An Invention to Support Professional and Hygienic Nursing Practice,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 7–13, 2021, doi: 10.31603/mesi.5262.
Y. A. Fatimah, K. Govindan, R. Murniningsih, and A. Setiawan, “Industry 4.0 based sustainable circular economy approach for smart waste management system to achieve sustainable development goals: A case study of Indonesia,” Journal of Cleaner Production, 2020, doi: 10.1016/j.jclepro.2020.122263.
M. Setiyo et al., “Industry 4.0: Challenges of Mechanical Engineering for Society and Industry,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 3–6, 2021, doi: 10.31603/mesi.5309.
T. Kivevele, T. Raja, V. Pirouzfar, B. Waluyo, and M. Setiyo, “LPG-Fueled Vehicles: An Overview of Technology and Market Trend,” Automotive Experiences, vol. 3, no. 1, pp. 6–19, 2020, doi: 10.31603/ae.v3i1.3334.
H. Hermansyah, L. Lukman, H. J. Prayitno, L. Andriyani, and Y. A. Fatimah, “Mechanical Engineering for Society and Industry: A Preface,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 1–2, Jul. 2021, doi: 10.31603/mesi.5313.
M. P. Sari, Y. A. Fatimah, and A. Rifaí, “Microplastics in the Indonesian Small Screen-Printing Industries: Environment and Human Possible Risks,” 2023, doi: 10.1063/5.0156148.
S. Munahar, M. Setiyo, M. M. Saudi, A. Ahmad, and D. Yuvenda, “Modelling Fuel Cut Off Controller on CNG Engines Using Fuzzy Logic: A Prototype,” International Journal on Advanced Science, Engineering and Information Technology, vol. 12, no. 5, pp. 1857–1865, 2022, doi: 10.18517/ijaseit.12.5.16849.
B. Waluyo, B. Pujiarto, N. Ardana, A. Sholiah, M. L. Rochman, and A. T. Adi, “Optimizing energy harvesting from waste motor oil through steam reforming: A path to efficient combustion and emissions reduction,” Mechanical Engineering for Society and Industry, vol. 3, no. 2, pp. 86–92, 2023, doi: 10.31603/mesi.10362.
A. B. D. Nandiyanto, R. Ragadhita, M. Setiyo, A. S. M. Al Obaidi, and A. Hidayat, “Particulate matter emission from combustion and non-combustion automotive engine process: Review and computational bibliometric analysis on its source, sizes, and health and lung impact,” Automotive Experiences, vol. 6, no. 3, pp. 599–623, 2023, doi: 10.31603/ae.10259.
S. Sunaryo, S. Suyitno, Z. Arifin, and M. Setiyo, “Performance and emission of a spark-ignition engine using gasoline-plastic pyrolysis oil blends,” Mechanical Engineering for Society and Industry, vol. 4, no. 1, pp. 68–81, Jul. 2024, doi: 10.31603/MESI.11278.
M. Setiyo, B. Waluyo, N. Widodo, M. L. Rochman, and I. B. Raharja, “Performance of mini air cooler on parked car under direct sunlight,” Journal of Physics: Conference Series, vol. 1517, no. 1, 2020, doi: 10.1088/1742-6596/1517/1/012002.
L. Muliawanti et al., “Physical distancing methods in public transportation to mitigate Covid-19: Practical evidence from ASEAN countries,” 2023, doi: 10.1063/5.0120225.
S. Munahar, M. Setiyo, B. C. Purnomo, B. Waluyo, and W. Himawan, “Prototype development of smart brake controller (SBC) for light-duty vehicles (LDVs) with manual,” 2019, doi: 10.1088/1757-899X/674/1/012004.
C. B. E. Praja et al., “Recent patents for handling Covid-19: Snapshot from Indonesian patent database,” 2023, doi: 10.1063/5.0120266.
K. Kamigaki, M. Matsumoto, and Y. A. Fatimah, “Remanufacturing and Refurbishing in Developed and Developing Countries in Asia - A Case Study in Photocopiers,” 2017, doi: 10.1016/j.procir.2016.11.223.
Y. A. Fatimah and W. K. Biswas, “Remanufacturing as a means for achieving low-carbon SMEs in Indonesia,” Clean Technologies and Environmental Policy, 2016, doi: 10.1007/s10098-016-1148-5.
Y. A. Fatimah and W. K. Biswas, “Remanufacturing as pathway for achieving circular economy for Indonesian SMEs,” 2017, doi: 10.1007/978-3-319-57078-5_39.
Y. A. Fatimah and M. Aman, “Remanufacturing sustainability indicators: An Indonesian small and medium enterprise case study,” 2018, doi: 10.1088/1757-899X/403/1/012055.
I. C. Setiawan and M. Setiyo, “Renewable and Sustainable Green Diesel (D100) for Achieving Net Zero Emission in Indonesia Transportation Sector,” Automotive Experiences, vol. 5, no. 1, pp. 1–2, Mar. 2022, doi: 10.31603/ae.6895.
S. Munahar, M. Setiyo, F. Masykur, and B. C. Purnomo, “Review of Research on the Application of CNG Fuel in Vehicle Engines: Research Bibliography 2017–2021,” 2024, doi: 10.1007/978-981-99-7495-5_26.
R. Rusdjijati, S. A. Subrata, Z. B. Pambuko, M. Setiyo, and M. Noga, “Strategy for Safe Passenger Transport during the COVID-19 Pandemic: From Review to Recommendation,” Automotive Experiences, vol. 5, no. 2, pp. 90–102, 2022, doi: 10.31603/ae.6593.
B. C. Purnomo, I. C. Setiawan, and H. A. Nugroho, “Study on Cooling System for Parked Cars using Mini Air Cooler and Exhaust Fan,” Automotive Experiences, vol. 3, no. 2, 2020, doi: 10.31603/ae.v3i2.3801.
Y. D. Herlambang et al., “Study on Solar Powered Electric Vehicle with Thermal Management Systems on the Electrical Device Performance,” Automotive Experiences, vol. 7, no. 1, pp. 18–27, 2024, doi: 10.31603/ae.10506.
W. Purwanto, J. C. T. Su, M. L. Rochman, B. Waluyo, K. Krismadinata, and A. Arif, “Study on the Addition of A Swirling Vane to Spark Ignition Engines Fueled by Gasoline and Gasoline-Ethanol,” Automotive Experiences, vol. 6, no. 1, pp. 162–172, 2023, doi: 10.31603/ae.7981.
Y. A. Fatimah and W. K. Biswas, “Sustainability Assessment of Remanufactured Computers,” 2016, doi: 10.1016/j.procir.2016.01.087.
A. Kolakoti and M. Setiyo, “Sustainable energy for future needs: An imperative for a greener tomorrow,” Mechanical Engineering for Society and Industry, vol. 4, no. 1, pp. 1–4, 2024, doi: 10.31603/mesi.11728.
Y. A. Fatimah, W. Biswas, I. Mazhar, and M. N. Islam, “Sustainable manufacturing for Indonesian small- and medium-sized enterprises (SMEs): the case of remanufactured alternators,” Journal of Remanufacturing, vol. 3, no. 1, p. 6, Dec. 2013, doi: 10.1186/2210-4690-3-6.
Y. A. Fatimah and B. Pujiarto, “Sustainable nature tourism development through ICT implementation: A case of Indonesian Pines Village,” 2019, doi: 10.1063/1.5085970.
M. Setiyo, “Sustainable Transport: The Role of Clean Energy, Mass Rapid Transit, Non-motorized Mobility, and Challenges to Achievement,” Automotive Experiences. 2023, doi: 10.31603/ae.9108.
M. Setiyo, S. Soeparman, N. Hamidi, and S. Wahyudi, “Techno-economic analysis of liquid petroleum gas fueled vehicles as public transportation in Indonesia,” International Journal of Energy Economics and Policy, 2016.
M. Setiyo, Saifudin, B. C. Purnomo, B. Waluyo, and A. I. Ramadhan, “Temperature Distribution of R-134a Through Aluminum and PTFE Expansion Valve on Automotive Air Conditioning Applications,” ARPN Journal of Engineering and Applied Sciences, vol. 12, no. 4, pp. 1046–1051, 2017, [Online]. Available: http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0217_5723.pdf.
M. Setiyo, S. Soeparman, S. Wahyudi, and N. Hamidi, “The Alternative Way to Drive the Automobile Air-Conditioning, Improve Performance, and Mitigate the High Temperature: A Literature Overview,” Periodica Polytechnica Transportation Engineering, vol. 46, no. 1, pp. 36–41, 2018, doi: https://doi.org/10.3311/PPtr.8892.
M. Setiyo, D. Yuvenda, and O. D. Samuel, “The Concise Latest Report on the Advantages and Disadvantages of Pure Biodiesel (B100) on Engine Performance: Literature Review and Bibliometric Analysis,” Indonesian Journal of Science and Technology, vol. 6, no. 3, pp. 469–490, 2021, doi: 10.17509/ijost.v6i3.38430.
Y. A. Fatimah, K. Govindan, N. A. Sasongko, and Z. A. Hasibuan, “The critical success factors for sustainable resource management in circular economy: Assessment of urban mining maturity level,” Journal of Cleaner Production, vol. 469, p. 143084, Sep. 2024, doi: 10.1016/J.JCLEPRO.2024.143084.
M. Setiyo, Saifudin, A. W. Jamin, R. Nugroho, and D. W. Karmiadji, “The Effect of Ethanol on Fuel Tank Corrosion Rate,” Jurnal Teknologi, vol. 80, no. 6, pp. 19–25, 2018, doi: https://doi.org/10.11113/jt.v80.12324.
S. Ozer, M. Akçay, B. Doğan, D. Erol, and M. Setiyo, “The Effects of Canola Oil/Diesel Fuel/Ethanol/N-Butanol/Butyl Di Glycol Fuel Mixtures on Combustion, Exhaust Gas Emissions and Exergy Analysis,” Automotive Experiences, vol. 5, no. 3, pp. 268–287, 2022.
R. Widyorini, N. H. Sari, M. Setiyo, and G. Refiadi, “The Role of Composites for Sustainable Society and Industry,” Mechanical Engineering for Society and Industry, vol. 1, no. 2, pp. 48–53, 2021, doi: 10.31603/mesi.6188.
M. Setiyo and M. L. Rochman, “The role of mechanical engineering in the era of industry 4.0 and society 5.0,” Mechanical Engineering for Society and Industry, vol. 3, no. 2, pp. 54–56, Dec. 2023, doi: 10.31603/mesi.10786.
B. Waluyo, I. N. G. Wardana, L. Yuliati, M. N. Sasongko, and M. Setiyo, “The role of polar ethanol induction in various iso-octane ethanol fuel blend during single droplet combustion,” Fuel Processing Technology, vol. 199, p. 106275, 2020, doi: https://doi.org/10.1016/j.fuproc.2019.106275.
A. I. Rahimi, D. C. Anindito, D. Danardono, and S. Hadi, “The Straight Blade Application to Increasing the Performance of the Savonius Water Turbine (Simulation Study),” in Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 2020, pp. 243–256, doi: 10.1007/978-981-15-4481-1_24.
F. I. Abam et al., “Thermodynamic modelling of a novel solar-ORC with bottoming ammonia-water absorption cycle (SORCAS) powered by a vapour compression refrigeration condensate for combined cooling and power,” Mechanical Engineering for Society and Industry, 2023, doi: 10.31603/mesi.10365.
A. Arisman and Y. A. Fatimah, “Waste Management in Indonesia: Strategies and Implementation of Sustainable Development Goals (SDGs) and Circular Economy,” Circular Economy Adoption: Catalysing Decarbonisation Through Policy Instruments, pp. 131–157, Jan. 2023, doi: 10.1007/978-981-99-4803-1_5.
M. Setiyo et al., “Preface,” in Journal of Physics: Conference Series, Apr. 2020, vol. 1517, no. 1, p. 011001, doi: 10.1088/1742-6596/1517/1/011001.
M. Setiyo et al., “Preface,” in E3S Web of Conferences, Mar. 2024, vol. 500, p. 00001, doi: 10.1051/e3sconf/202450000001.
Y. A. Fatimah, “Prefeace,” in IOP Conference Series: Materials Science and Engineering, Nov. 2019, vol. 674, no. 1, p. 011001, doi: 10.1088/1757-899X/674/1/011001.
B. Waluyo, I. N. G. Wardana, L. Yuliati, M. N. Sasongko, and M. Setiyo, “The role of polar ethanol induction in various iso-octane ethanol fuel blend during single droplet combustion,” Fuel Processing Technology, 2020, doi: 10.1016/j.fuproc.2019.106275.
M. Setiyo, D. R. B. Syaka, B. Waluyo, and ..., “Cooling effect potential from liquefied petroleum gas flow in the fuel line of vehicle,” … Journal of Automotive …, 2017, [Online]. Available: http://ijame.ump.edu.my/images/Volume 14 Issue 4 2017/9_Setiyo et al.pdf.
A. Körfgen et al., “It’s a Hit! Mapping Austrian research contributions to the sustainable development goals,” Sustainability (Switzerland), vol. 10, no. 9, pp. 1–13, 2018, doi: 10.3390/su10093295.
X. Hong, A. Calderon, and H. Coates, “Universities and SDGs: evidence of engagement and contributions, and pathways for development,” Policy Reviews in Higher Education, vol. 7, no. 1, pp. 56–77, Jan. 2023, doi: 10.1080/23322969.2022.2121311.
