Toward Durable Prosthetic Feet: Mechanical and Tribological Evaluation of Polyurethane Elastomers
DOI:
https://doi.org/10.26877/asset.v8i4.2981Keywords:
Polyurethane elastomer, prosthetic foot, wear resistance, friction, mechanical propertiesAbstract
Elastomeric materials play a crucial role in determining the durability, comfort, and service life of prosthetic feet. Although various elastomers have been explored for this application, systematic evaluation of polyurethane formulations that integrate mechanical and tribological performance remains limited. This study investigates two types of polyurethane elastomers (A70 and A80) with different polyol–isocyanate ratios to identify an optimal formulation for prosthetic foot applications. Mechanical properties were evaluated through tensile, tear, hardness, and density tests, while friction and wear behavior were assessed using a pin-on-disk tribometer. A commercial prosthetic foot elastomer available in the Indonesian market was used as a benchmark. The results show that A80-based formulations generally provide superior tensile and tear strength compared to A70 variants. Among all specimens, A80-3 exhibits the lowest wear volume and stable friction performance, while maintaining hardness comparable to the commercial product. Although its density remains higher than the benchmark, the improved wear resistance indicates potential for extended service life. These findings offer practical guidance for durability-oriented material selection in the development of cost-efficient prosthetic feet.
References
[1] Selvam PS, Sandhiya M, Chandrasekaran K, Rubella DH, Karthikeyan S. Prosthetics for lower limb amputation. Prosthetics and Orthotics: IntechOpen; 2021. https://doi.org/10.5772/intechopen.95593
[2] McDonald CL, Westcott-McCoy S, Weaver MR, Haagsma J, Kartin DJP, international o. Global prevalence of traumatic non-fatal limb amputation. 2021;45(2):105-14. https://doi.org/10.1177/0309364620972258
[3] Morgan SJ, Liljenquist KS, Kajlich A, Gailey RS, Amtmann D, Hafner BJ. Mobility with a lower limb prosthesis: experiences of users with high levels of functional ability. Disability and Rehabilitation. 2022;44(13):3236-44. https://doi.org/10.1080/09638288.2020.1851400
[4] Silva AdM, Furtado G, Dos Santos IP, da Silva CB, Caldas LR, Bernardes KO, et al. Functional capacity of elderly with lower-limb amputation after prosthesis rehabilitation: a longitudinal study. 2021;16(5):556-60. https://doi.org/10.1080/17483107.2019.1684581
[5] Şimsek N, Öztürk GK, Nahya ZN. The Mental Health of Individuals With Post-Traumatic Lower Limb Amputation: A Qualitative Study. 2020;7(6):1665-70. https://doi.org/10.1177/2374373520932451
[6] Mohammed R, Shaik AS, Mohammed S, Bunga KK, Aggala C, Babu BP, et al. Advancements and Challenges in Additive Manufacturing: Future Directions and Implications for Sustainable Engineering. Advance Sustainable Science, Engineering and Technology. 2025;7(1). https://doi.org/10.26877/asset.v7i1.1079
[7] Khafidh M, Marwa PA, Alfajr B, Suryawan D, Kistriyani L, Ismail R. The mechanical properties of elastomeric materials in prosthetic feet: Comparison between local and imported products. AIP Conference Proceedings. 2023;2568(1). https://doi.org/10.1063/5.0114404
[8] Kistriyani L, Khafidh M, Suryawan D, Ismail R, editors. Physical characteristic of polymer formulations for prosthetic foot materials: Comparison of natural rubber and ethylene vinyl acetate. Proceeding of The 2nd International Conference on Engineering Science and Technology (ICEST 2021); 2023: AIP Publishing LLC. https://doi.org/10.1063/5.0109385
[9] Khafidh M, Suryawan D, Kistriyani L, Naufal M, Ismail R. Friction Optimization of Talc Powder-Reinforced Elastomers for Prosthetic Foot Application. 2023;5(1):88-99. https://doi.org/10.3390/prosthesis5010007
[10] Omar MF, Ali F, Jami MS, Azmi AS, Ahmad F, Marzuki MZ, et al. A Comprehensive Review of Natural Rubber Composites: Properties, Compounding Aspects, and Renewable Practices with Natural Fibre Reinforcement. 2025;13(3). https://doi.org/10.32604/jrm.2024.057248
[11] Guerra NB, Sant'Ana Pegorin G, Boratto MH, de Barros NR, de Oliveira Graeff CF, Herculano RD. Biomedical applications of natural rubber latex from the rubber tree Hevea brasiliensis. Materials Science and Engineering: C. 2021;126:112126. https://doi.org/10.1016/j.msec.2021.112126
[12] Khafidh M, Schipper DJ, Masen MA. The Formation of a Modified Surface Layer on Elastomeric Materials. Tribology Letters. 2019;67(1):27. https://doi.org/10.1007/s11249-019-1140-4
[13] de Souza FM, Kahol PK, Gupta RK. Introduction to Polyurethane Chemistry. Polyurethane Chemistry: Renewable Polyols and Isocyanates. ACS Symposium Series. 1380: American Chemical Society; 2021. p. 1-24. https://doi.org/10.1021/bk-2021-1380.ch001
[14] ISO 10328: 2016 Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods. London, UK.
[15] Subhash N, Mehra N, Choudhary A, Baby CJ, Aravind A, Benny P, et al. Structural Performance Assessment of FUPRO Grace Foot. 2022;36(2).
[16] Kathrotiya D, Yusuf A, Bhagchandani RK, Gupta S. A Study for the development of prosthetic foot by additive manufacturing. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023;45(3):187. https://doi.org/10.1007/s40430-023-04107-y
[17] Ismail R, Nursafitri MA, Fardinansyah AP, Fitriyana DF, Bayuseno AP, Siregar JP, et al. Design, fabrication, and performance testing of an energy storage and return (ESAR) foot prosthesis made of prepreg carbon composite. 2025;5(1):20-32. https://doi.org/10.31603/mesi.12652
[18] Kareem ZJJoUoBfES. From Metals to Composite Materials: A Comprehensive Review of Materials Used in Prosthetic Limb Manufacturing. 2025;33(4):140-67. https://doi.org/10.29196/jubes.v33i4.5902
[19] Yousif LE, Abed MS, Al-Zubidi AB, Resan KK. Innovations in prosthetic foot design enhancing durability, functionality and comfort through PLA composite filament 3D printing. Pigment & Resin Technology. 2024;ahead-of-print(ahead-of-print). https://doi.org/10.1108/PRT-10-2023-0092
[20] Kaiser F, Savio D, Bactavatchalou RJL. Modelling of static and dynamic elastomer friction in dry conditions. 2024;12(7):250. https://doi.org/10.3390/lubricants12070250
[21] Markov DPJF. Adhesion at friction and wear. 2022;10(11):1859-78. https://doi.org/10.1007/s40544-021-0564-7
[22] Lyashenko IA, Pham TH, Popov VLJL. Transition between friction modes in adhesive contacts of a hard indenter and a soft elastomer: an experiment. 2024;12(4):110. https://doi.org/10.3390/lubricants12040110
[23] Khafidh M, Schipper DJ, Masen MA, Vleugels N, Dierkes WK, Noordermeer JWM. Friction and wear mechanism of short-cut aramid fiber and silica reinforced elastomers. Wear. 2019;428-429:481-7. https://doi.org/10.1016/j.wear.2019.04.016
[24] Kumar R, Hussainova I, Rahmani R, Antonov MJM. Solid lubrication at high-temperatures—A review. 2022;15(5):1695. https://doi.org/10.3390/ma15051695
[25] Pieniak D, Jedut R, Gil L, Kupicz W, Borucka A, Selech J, et al. Comparative Evaluation of the Tribological Properties of Polymer Materials with Similar Shore Hardness Working in Metal–Polymer Friction Systems. 2023;16(2):573. https://doi.org/10.3390/ma16020573
[26] Maksuta D, Dalvi S, Gujrati A, Pastewka L, Jacobs TD, Dhinojwala AJSM. Dependence of adhesive friction on surface roughness and elastic modulus. 2022;18(31):5843-9. https://doi.org/10.1039/d2sm00163b
[27] Junik K, Lesiuk G, Barcikowski M, Błażejewski W, Niemiec A, Grobelny M, et al. Impact of the hardness on the selected mechanical properties of rigid polyurethane elastomers commonly used in suspension systems. Engineering Failure Analysis. 2021;121:105201. https://doi.org/10.1016/j.engfailanal.2020.105201
[28] Ligier K, Olejniczak K, Napiórkowski J. Wear of polyethylene and polyurethane elastomers used for components working in natural abrasive environments. Polymer Testing. 2021;100:107247. https://doi.org/10.1016/j.polymertesting.2021.107247
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Advance Sustainable Science Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
