Behavior of Lightweight Aggregate Concrete with FRP Confinement: Experimental Insights for Structural Applications
DOI:
https://doi.org/10.26877/asset.v8i3.1650Keywords:
Artificial lightweight aggregate, lightweight aggregate concrete, CFRP, ultimate stress, ultimate strain, Stress-strain behaviour, concentric compressionAbstract
Lightweight aggregate concrete reduces structural dead load but generally exhibits lower compressive strength and ductility than normal-weight concrete. This study experimentally evaluates the effectiveness of carbon-fibre-reinforced polymer (CFRP) confinement for low-density lightweight aggregate concrete, an area in which data for square sections remain limited. Twelve 300-mm-high specimens with a density of approximately 1550 kg/m³ were tested under monotonic concentric compression. The investigated parameters were concrete compressive strength (15 and 28 MPa), cross-sectional shape (square and circular), and number of CFRP layers (one and two). Failure occurred through localized, extensive, or hoop rupture of the CFRP. The confined specimens exhibited approximately bilinear stress–strain responses and substantial improvements in strength and deformation capacity. For square specimens with 15 MPa concrete, two CFRP layers increased the average strength ratio to 2.27 and the strain ratio to 23.39. Circular specimens developed greater confinement efficiency, reaching an average strength ratio of 3.76 with two layers. Lower-strength concrete showed larger relative ductility gains than higher-strength concrete. These findings demonstrate that CFRP confinement can substantially reduce the brittle response of low-density lightweight concrete and support its use in lightweight, resilient, and earthquake-resistant structural applications.
References
[1] Huang Y. Mix Proportion of Lightweight Straw Ceramsite Concrete. Converter 2021:110–7. https://doi.org/10.17762/converter.41.
[2] Domagała L. Durability of Structural Lightweight Concrete With Sintered Fly Ash Aggregate. Materials 2020;13:4565. https://doi.org/10.3390/ma13204565.
[3] Mehrab AH, Esfahani MR. Experimental Study on Size Effect and Fracture Properties of Polypropylene Fiber Reinforced Lightweight Aggregate Concrete. Periodica Polytechnica Civil Engineering 2022. https://doi.org/10.3311/ppci.20345.
[4] Hosen MdA, Shammas MI, Shill SK, Al‐Deen S, Jumaat MZ, Hashim H. Ductility Enhancement of Sustainable Fibrous-Reinforced High-Strength Lightweight Concrete. Polymers (Basel) 2022;14:727. https://doi.org/10.3390/polym14040727.
[5] Elango KS, Sanfeer J, Gopi R, Shalini A, Saravanakumar R, Prabhu L. Properties of light weight concrete - A state of the art review. Mater. Today Proc., vol. 46, Elsevier Ltd; 2020, p. 4059–62. https://doi.org/10.1016/j.matpr.2021.02.571.
[6] Karthik J, Surendra HJ, Prathibha VS, Anand Kumar G. Experimental study on lightweight concrete using Leca, silica fume, and limestone as aggregates. Mater. Today Proc., vol. 66, Elsevier Ltd; 2022, p. 2478–82. https://doi.org/10.1016/j.matpr.2022.06.453.
[7] Adai Al-Farttoosi HK, Abdulrazzaq OA, Hussain HK. Mechanical Properties of Light Weight Aggregate Concrete Using Pumice as a Coarse Aggregate. IOP Conf Ser Mater Sci Eng 2021;1090:012106. https://doi.org/10.1088/1757-899x/1090/1/012106.
[8] Ahmad MR, Chen B, Farasat Ali Shah S. Investigate the influence of expanded clay aggregate and silica fume on the properties of lightweight concrete. Constr Build Mater 2019;220:253–66. https://doi.org/10.1016/j.conbuildmat.2019.05.171.
[9] Lu JX. Recent advances in high strength lightweight concrete: From development strategies to practical applications. Constr Build Mater 2023;400. https://doi.org/10.1016/j.conbuildmat.2023.132905.
[10] Xiong G, Wang C, Zhou S, Jia X, Luo W, Liu J, et al. Preparation of high strength lightweight aggregate concrete with the vibration mixing process. Constr Build Mater 2019;229. https://doi.org/10.1016/j.conbuildmat.2019.116936.
[11] Zhou Y, Liu X, Xing F, Cui H, Sui L. Axial compressive behavior of FRP-confined lightweight aggregate concrete: An experimental study and stress-strain relation model. Constr Build Mater 2016;119:1–15. https://doi.org/10.1016/j.conbuildmat.2016.02.180.
[12] Valasaki MK, Papakonstantinou CG. Fiber Reinforced Polymer (FRP) Confined Circular Concrete Columns: An Experimental Overview. Buildings 2023;13. https://doi.org/10.3390/buildings13051248.
[13] de Diego A, Martínez S, Castro VJ, Echevarría L, Barroso FJ, Gutiérrez JP. Experimental investigation on the compressive behaviour of FRP-confined rectangular concrete columns. Archives of Civil and Mechanical Engineering 2022;22. https://doi.org/10.1007/s43452-022-00450-4.
[14] Li H, Wei Y, Hu Y, Zhao L, Wang G, Zhang Y. Experimental and theoretical analysis of FRP-confined square lightweight aggregate concrete columns under axial compression. Case Studies in Construction Materials 2024;20. https://doi.org/10.1016/j.cscm.2024.e02982.
[15] Ozbakkaloglu T. Behavior of square and rectangular ultra high-strength concrete-filled FRP tubes under axial compression. Compos B Eng 2013;54:97–111. https://doi.org/10.1016/j.compositesb.2013.05.007.
[16] Al-Salloum YA. Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates. Compos B Eng 2007;38:640–50. https://doi.org/10.1016/j.compositesb.2006.06.019.
[17] Louk Fanggi BA, Budi Suswanto, Yuyun Tajunnisa, Jusuf Wilson Meynerd Rafael, Jonatan Lassa, Ahmad Basshofi Habieb. An Experimental Study on Axial Stress-Strain Behaviour of FRP-Confined Square Lightweight Aggregate Concrete Columns. Advance Sustainable Science Engineering and Technology 2025;7:0250112. https://doi.org/10.26877/asset.v7i1.865.
[18] Wu T, Yang X, Wei H, Liu X. Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers. Constr Build Mater 2019;199:526–39. https://doi.org/10.1016/j.conbuildmat.2018.12.037.
[19] Tasdemir:’" MA, Barr BIG, Tasdemiry C, Wz S, Jefferson AD, Lydon FD. Evaluation of Strains at Peak Stresses in Concrete: A Three-Phase Composite Model Approach. vol. 20. 1998.
[20] Louk Fanggi BA, Tajunnisa Y, Masrafat H, Rafael JWM. Efek Variasi Jenis Pasir Terhadap Berat dan Kuat Tekan Beton Ringan Dari Agregat Kasar Ringan Buatan. Jurnal Teknik Sipil 2025;14:2025–74.
[21] Louk Fanggi BA, Suswanto B, Tajunnisa Y, Habieb AB, Rafael JWM, Asy‘ari YH, et al. Perilaku tegangan-regangan beton yang terbuat dari agregat ringan buatan yang diperkuat dengan carbon fyber reinforced polymer. Jurnal Teknik Sipil 2023;12:1–7.
[22] Li P, Sui L, Xing F, Huang X, Zhou Y, Yun Y. Effects of aggregate types on the stress-strain behavior of fiber reinforced polymer (FRP)-confined lightweight concrete. Sensors 2018;18:3525. doi: https://doi.org/10.3390/s18103525.
[23] Wei H, Wu T, Liu X, Zhang R. Investigation of stress-strain relationship for confined lightweight aggregate concrete. Construction and Building Materials 2020;256:119432. doi: https://doi.org/10.1016/j.conbuildmat.2020.119432.
[24] Zhou Y, Liu X, Xing F, Li D, Wang Y, Sui L. Behavior and modeling of FRP-concrete-steel double-skin tubular columns made of full lightweight aggregate concrete. Construction and Building Materials 2017;139:52–63. doi: https://doi.org/10.1016/j.conbuildmat.2016.12.154.
[25] Ranjkesh Ghahnavieh M, Kamgar R, Heidarzadeh H. A design-oriented model for FRP well-confined concrete cylinders under axial loading. Structures 2022;38:1005–1017. doi: https://doi.org/10.1016/j.istruc.2022.02.062.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Advance Sustainable Science Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
